Pos58 Printer Driver Windows 10

Posted on  by  admin
Note: This article is outdated. The current driver is v4.51; see Related Pages to download and use that version.
  1. Install Hp Printer Driver Windows 10
  2. Pos58 Thermal Printer Driver For Windows 10

Install Hp Printer Driver Windows 10

Printer

Dec 1, 2014 - I was able to get the printer installed successfully. Was able to obtain the latest driver for this product (POS58). However the problem was not.

Download and extract the following file for the Windows print driver installer for receipt printers offered by Wasp:
This driver is compatible with Windows 10, Windows 8, Windows 7, Vista, and XP.
Pos58 Printer Driver Windows 10
Windows 10: Start at Step 4 of the procedure below for first-time installations.
Windows 8: you may need to disable driver signing for this to install properly (see Related Content below).
Windows versions later than 7: Select Windows 7 for OS.
RP330
WRP8055
Note: You will need to complete additional steps if you experience strange behavior when printing to the receipt printer, such as:

Pos58 Thermal Printer Driver For Windows 10

  • Clicking 'Print Test Page' from the Printer Properties dialog causes multiple windows to close unexpectedly (even if the test page prints).
  • Printing from QuickBooks Point of Sale (POS) works once (though output may be garbled), then QB says the printer is not found.
Steps (note: reboot is required)
  1. Open the Programs and Features control panel (or Start, Run, appwiz.cpl)
  2. Find 'LK-TXX 3.5.1' in the list, right-click, and Uninstall. If you get a message that the printer doesn't exist, do steps 6-8, then start this step again.
  3. At the end, uncheck 'Rebooting' to prevent the PC from restarting. Complete the uninstaller.
  4. Unplug the printer's USB cable and leave it out for now.
  5. If needed, save documents and close applications, then reboot the PC.
  6. Run the 'THERMAL PRINTER 3.5.1.exe' driver installer.
  7. In the OS Information Dialog, leave the Printer Port on LPT1. (If you change it to USB, the installer will fail and not install the driver, since the printer is not connected.)
  8. Finish the installation. At the end, uncheck 'Rebooting' to prevent the PC from restarting.
  9. Open the Devices and Printers control panel.
  10. Plug in the printer's USB cable. After a moment, you should see POS PRINTER or LUKHAN PRINTER in the Unspecified section.
  11. Find VENDOR THERMAL PRINTER, right-click, then Printer Properties (both words).
  12. On the Ports tab, find the highest numbered USB### in the Port column, and check it. The correct port might not be the highest numbered one, but it shouldn't have any other printer assigned to it.
  13. Click Apply.
  14. On the General tab, click Print Test Page. A page should print. If not, go back to Step 12 and try a different USB### port.
  15. When you get a successful test page (and the windows remain open), the printer is installed properly.
  16. If using QuickBooks, configure the printer there, and try a test.
  17. If using QuickStore, click File menu, Printer Setup, Sales, and set or verify the printer. Click the Next button until the receipt printer shows on all the appropriate categories, then click OK (even if you don't change anything). If you have a cash drawer attached, click Setup menu, This Computer, 2. Cash Drawer, and set or verify the settings there, then click OK (even if you don't change anything). Make a test sale to confirm the printer prints and the cash drawer opens.
If you have lost your disk driver installation for your 58MM Thermal Receipt Printer with model POS-5890C - you can download a copy of this driver here on our page. Its pretty hard to find a copy of this driver online because this kind of thermal printer are generic and getting the official website or manufacturer of this model is no where to found on the internet and you might also getting risk of downloading malicious program, if you're downloading from unknown source. I bought this thermal printer on ebay and I still have the disk driver, so I think its a good idea to share the disk driver for everybody. Here is the full specification of the Thermal Receipt Printer, see below: Model: POS-5890CPaper Width: 58mmCash Drawer: DC12V/1APower Input: DC12V/3AInterface: USB You can download the Printer Driver on the link below (39.8MB):https://gamingph.com/files/58MMThermalrecieptprinter.zip This driver works on Linux, Windows 10, 8.1, 7 or lower version, it also include the operating manual of the printer. Driver Directory:Linux Printer Driver Software/linux32bit/install58Linux Printer Driver Software/linux32bit/install80Linux Printer Driver Software/linux64bit/install58Linux Printer Driver Software/linux64bit/install80Manual/58MMPrinter Programmer Manual-20150312.pdfManual/76MM Program Manual V2.2.pdfManual/80MM Printer Programmer Manual-20150312.pdfPrinter Driver Software/POS Printer Driver Setup .exeSDK/BluetoothDEMO/...SDK/NETDEMO/...SDK/USBDEMO/...SDK/WIFIDEMO/...Tools/Bluetooth Set tool/...Tools/IP Setting Tool(For Single Interface Printer)/...Tools/IP Setting Tool(For Three Interfaces Printer)/...Tools/PDF Reader/...Tools/Printer Parameters Setting Tool/...Tools/WIFI AT Send Tool/...58MM Thermal receipt printer operating manual.pdf If you find this post helpful, please share this page or like our Facebook page at https://facebook.com/GamingPH/.
Coments are closed
Scroll to top